In order to install your unit, first please attach each standoff to the corners behind the weatherproof box. After confirming the required high restrictions, kindly hang your emergency unit where the middle of the unit is approximately 4 ft off the ground. Use a level to ensure a straight install. The power cord can be secured as shown, or put through a wall or use wire coverings available at your local hardware stores.
After plugging in your device, turn it on by using the power switch inside the unit as shown. Wait five full minutes. Please note: service activation must be confirmed by SoutheastTelephone's team before the unit will work.
Because this is an auto-dial model, you will not be able to make standard outgoing calls. The unit will still accept inbound calls, which you can use to initially test your new service. Finally, to complete testing, pick up the receiver, it will automatically dial 911, and kindly explain to them that this is not an emergency and that this is a test call. The 911 dispatch will confirm your location, name, address, and phone number.